Mechanical watch adjustment principle of time
Let stand for a long period of time, mechanical watch spring nature relaxing to watch, stillness at this time, if you want to wear, you must first to wind, then the calibration time, general mechanical watches in the spring the pine, hour hand, minute hand will appear the phenomenon of slow or fast, therefore, should first wind, lest after calibration of time, there is no standard power driven pointer, even tempered in the automatic watch, also should use manual first tried to eight full, and then to time calibration. Wrist watch move error suddenly get bigger, and watch the wearer frequently encountered problems, encountered this kind of problem don't panic, there are several simple reason recognition and processing methods to share with you.
1. The battery is low: if quartz watch, walking slowly, suddenly found that is likely to be caused by a lack of battery power, you can send a watch to special maintenance station detection power.2. Power reserve: you need to check whether the power is enough, automatic chain watch if small amount of exercise can also cause power reserve is insufficient, can supplement by means of manual chain on the power, and then see if continue to have a fast phenomenon.3. Watch the magnetic: if balance spring magnetized mechanical watch, watch is not accurate as well.4. Need maintenance: the movement of walking oil aging or wear of the internal parts can cause problems, need to be sent to the designated health maintenance services.Break or knock: watch very precise, if the items within the hit to bang may cause looseness damage can also cause problems as well. In addition to these common conditions, the influence of some environmental temperature, the influence of the wearer's habits can cause the increase of the error as well. But you don't have to worry about, please send the watch to the specified maintenance point ask professional personage to check and adjust to watch returned to normal within the error range.
.jpg)
