Welcome to Dongguan Heng-Rong Hardware Electronic Technology Co., Ltd. !
News Center

Repair themselves can also keep the quartz clock movement
Source:http://www.hrclockmovement.com | Author:hrclock | Published time: 2022-06-25 | 4423 Views | Share:
Wipe after to install good second hand and battery to see if it is normal.

If normal again after installation, if not normal to check the gear is installed, if no oil gear shaft position can add some sewing machine oil in small quantities.Must recognize the position of the gear and the positive and negative, if you're afraid to forget to take a photo as a reference, and must pay attention to the movement back cover when loading, must be perpendicular to the press lest hydraulic gear shaft, after the machine back cover, quartz clock movement to promote the tuning knob, so gear tooth matchup oh!








Products Center

Fax: 86-769-85325192


2355294916   2355294918 hengrong1688

Tel: 86-769-85532891
Contact Us
No.4, Lane 6 Huaide village dongfang, Humen Town
Dongguan
Guangdong
China
523926

Related Products
  • HR1688SI-23MM High torque clock movement Quartz clock
  • HR9998 and 01008 Metal clock hands 903 Metal second hands
  • HR9611 Metal clock hands 903 Metal second hands
  • skeleton clock movement
  • Diamter 103mm skeleton clock
  • Diameter 70 MM plastic quartz clock inserts
  • Axial length 11.8 MM tide clock movements
  • 24 hours wall clock movement
  • Pendulum wall clock movement
  • 8160-8171 Alarm clock movement hands